About Mobile Odin Pro 1.1 This is a short guide explaining how you can install an app you found here on your phone. I’m also going to show you a way that’s a lot easier then the standard method everyone uses.
Please make sure your phone has “Mobile Odin Pro 1.1 apk” enabled in it’s settings! To check this go to Settings -> Applications -> Unknown Sources and check the box. You have two options, either put the Download Mobile Odin Pro 1.1 apk file onto your phone’s SD card or download and install it directly from your phone.Mobile Odin Pro 1.1
Mobile Odin Pro 1.1 apk
Requirements: Samsung Galaxy S + SII,Samsung Galaxy Note and Tab
Overview: Install new firmware without kies or pc right from your Mobile
Mobile ODIN – Full firmware flashing straight from the device itself!
Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.
!!! Your device must be rooted to be able to use Mobile ODIN !!!
If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
Currently supported devices:
- Samsung Galaxy S2 GT-I9100
- Samsung Galaxy Note GT-N7000
- Samsung Galaxy S GT-I9000 *NEW*
- Samsung Galaxy Tab 7″ GT-P1000 *NEW*
More devices to come!
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
For discussion, check out the forum thread on XDA-Developers.com: http://forum.xda-developers.com/showthr … ?t=1347899
—– MANUAL —–
Flashing with Mobile ODIN is easy. You start off by starting the app. The app will check your system has everything the app needs to continue (like root). It may direct you to install an extra package (free) from the Market.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file – Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you may be used to “PDA”, “PHONE”, and “CSC” buttons. All three of these buttons have been replaced by the “Open file …” button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to “Flash firmware”. Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
—– DEVICE SUPPORT —–
See the forum thread on XDA-Developers.com ( http://forum.xda-developers.com/showthr … ?t=1347899 ) for more information on how to get your device supported.
Free Mobile Odin Pro 1.1 apk
Tags: android, apk, apsp, download, free, free android apk, free android apps, Free Mobile Odin Pro android app apk, Free Mobile Odin Pro app apk download, Mobile Odin Pro 1.1 android app apk, Mobile Odin Pro 1.1 app apk download
Get Updates
Subscribe to our e-mail newsletter to receive updates.
<form class="subscribe-form" action="http://feedburner.google.com/fb/a/mailverify" method="post" target="popupwindow" onsubmit="window.open('http://feedburner.google.com/fb/a/mailverify?uri=', 'popupwindow', 'scrollbars=yes,width=550,height=520');return true">>
<input class="email" type="text" name="email" value="E-mail" onfocus="if (this.value == 'E-mail') {this.value = '';}" onblur="if (this.value == '') {this.value = 'E-mail';}">/></input><input type="hidden" value="" name="uri">/></input><input type="hidden" value="" name="title">/></input><input type="hidden" name="loc" value="en_US">/></input><input class="button" type="submit" name="submit" value="Submit">/></input>
</form>
Share This Post
Tweet
Related Articles
- Enhanced Email v1.28.5
- Gentle Alarm v3.4.2
- Screenshot It v3.02
- Keyboard Manager (root users) v1.9
- Google Maps v5.12.0 (World Navigation activated, new flash)
